Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Power Factors?

Status
Not open for further replies.

gshaheen

Vendor
Apr 22, 2001
107
US
We have a Magix we recently installed with 1-412 tdl in slot 1, and 4-ETR cards in slots 2-5. The system is in the Hybrid mode with mostly all partner 18-D phones.
The 2nd cabinet has a few 800 cards and the voice mail.

The system has been locking up once or twice per week and comes back on a reset.

Before we go wild changing out cards, is the power supply in the 1st magix carrier strong enough to drive that many stations?

I seem to remember some station limititations per cabinet on the old legend systems.
This is a metal carrier by the way.

Thanks!
 
Should not be a power issue - unless the supply is bad. What clues does the processor error log display? Have you checked all of the TTR's in the system?

Tom Daugirdas,
President
STCG, Inc.
stcg.com
 
I have been working on two Merlin Magix systems each with two cabinets and many cards (TDL,ETR,PRI,T1,Merlin Messaging) I have not seen this problem. I would agree with the above comment though. What is the error log telling you? Is the power supply failing or is the system loosing power before the system? Just a thought.

Ryan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top