Portshield config question on PRO 1260

[hessaacd]

I am pre-configuring a Sonicwall pro 1260 with a Portshield interface in the DMZ zone. It will be a transparent portshield interface. I was reading the configuration guide and came across the following requirement under the Prerequisites section:

<quote>

All other ports must meet two conditions: they must be enabled and have both the HTTP and HTTPS
management options enabled that allow a management session to be established between the
interface they map to and a network console.
</qoute>
From:

http://www.sonicwall.com/downloads/configuring_portshield_interfaces.pdf

Is this to say that I must enable HTTP and HTTPS management on all interfaces?

Thanks, Alan