Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ports on Extreme Summit48Si

Status
Not open for further replies.

Netomaniac

Technical User
Jun 8, 2006
64
US
Guy's,

If a port is added to the VLAN and if the port is not configured for auto-on or auto-off, what would be the default configuration on the ports.


Neto.......
 
If you haven't configured the port speed, it will default to auto negotiate.

Stu
 
I got it,

but if the other side is configured for auto-off 10 full duplex will the auto-negotiate will settle down for 10 full duplex

Neto.....
 
If you are running auto negotiate, you should run it on both sides, otherwise the extreme will probably negotiate to half duplex and you'll see errors.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top