Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ports needed for remote IP sets over VPN

Status
Not open for further replies.

koulioumbis

IS-IT--Management
May 21, 2009
421
GR
Hello team.
Can someone advise what ports are needed to be opended from cental site to remote VPN sites for example site B and site C in order to enable users talk from site C to site B ?
Users on site A talk OK to users on site B & C but when a user on site B calls a user on site C there is only ringing. when answerting the call there is no speech patch.
All are ip2002 sets. No remote worker is being used as all remote users are behind site to site vpn.

Thanks

Nikos
 
Hello Nikos

If it's across a VPN, then there shouldn't be any extra ports needed except the standard 7000 and 30000 to 30099 (BCM 50) or 30000 to 30999 (BCM 450)

Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer

Very advance high level knowledge on the Linux BCM phone system.

Website
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top