Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

porting numbers from Nortel to Cisco

Status
Not open for further replies.
tausloos

tausloos

Technical User
Jan 8, 2008
48
US
I know we have the capability to port numbers from Nortel to Cisco. Is it done from the Nortel side or the Cisco side and how do I do it?

Thanks,

Tina
 
Sort by date Sort by votes
Which Nortel and cisco systems?

On option 81c/CS100 it has been done with DSC (Distant Steering codes) think its ld87 but requires a link from the nortel to the cisco. so each dn will have a DSC to the Cisco.
 
Upvote 0 Downvote
Porting numbers is done by the Telco. They would route the DID's to a different circuit for instance, for inbound calls. Is this what you were referring to?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
256
mikedphones
mikedphones
Russell35674
  • Locked
  • Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
257
whykap
whykap
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
304
thepfy
thepfy
keyset6
  • Locked
  • Question
No transmit from new laptop microphone using Jabber
Replies
7
Views
522
keyset6
keyset6
DTGMI
  • Locked
  • Question
Cisco ATA-191-K9 vs 3PW Mod
Replies
1
Views
309
gnrslash4life
gnrslash4life

Part and Inventory Search

Sponsor

Back
Top