Portforwarding with cisco PIX 501

[Jefhandle]

Portforwarding with cisco PIX 501


Hello
I am newbe and try to configure my router to access a web server from internet.
I reset the PIX 501 router to the factory default configuration and used this command (from

http://www.linuxhomenetworking.com/cisco-hn/dsl-pix.htm

) to make the

http://www service

accessible and access my web server from outside . Unfortunately it does not work!


global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-list inbound permit icmp any any
access-list inbound permit tcp any any eq www
access-group inbound in interface outside
static (inside,outside) tcp interface

http://www 192.168.1.100

http://www netmask

255.255.255.255
PS:In my previous thread I explained the problem with ping from the pc. please read it, maybe there are some dependency beetwen them.
????
thanks

 

[horus42]

Make sure that you don't have any access rules on the router that is blocking your incoming traffic