Port to open in the FW for the 7434 ip phone?

[doktor]

Dear Sirs

Maybe you can help me on this one:

Which ports to open in the FW for the 7434 ip phone?

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[doktor]

It runs H.323 and the signalling TCP ports 1719/1720 are opened. The question deals with which UDP ports should be opened.

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[snor]

Hi,

here`s the port-list (can be found in ALEX "DBC43x and DBC44x installation instructions" (1531-DBC 433 01 Uen G9 2014-03-19)

Selection of Transport Addresses (Port Numbers)
The tables shows the port numbers used for signalling and media in the phone.
It is the receiving port numbers in the phone that are shown.

UDP ports used by the phone
Type of signalling Minimum Maximum Comment
DHCP client 68 68
SNMP 161 161
RAS/GRQ 1718 1718 Multicast
RAS 1719 1719
WAP (Push) 2948 2948 Receive from internal
WAP server (PBX)2948 2948 Receive from internal WAP server (PBX)
URQ in secure mode 3727 3727
OMD 5000 5001 For speech
VoIP Recording 7300 7300
RTP 16986 17012
RTCP 16987 17013 RTP port + 1
WAP (Reply) 49152 49152 Receive from internal WAP server (PBX)
WAP (Reply) 49153 49153 Receive from external WAP server

TCP ports used by the phone
SSH 22 23 Secure Shell
Web Server Port 80 80 Web server in the phone
H.225 secure port 1300 1300 Incoming call to the phone, default value. Can be 1722 if the phone receives this value in RCF.
H.245 1390 1396
H.225 1720 1720 Incoming call to the phone
H.225 unsecure port 1722 1722 Incoming call to the phone is 1722 if the phone receives this value in RCF. The default number is 1300.
RAS over TCP 3727 3727 TLS signaling.
Web Browser Port 8080 8080 When using the WAP browser in the phone to access external web pages

best regards,
Norbert