Hello guys,
We've recently upgraded to this version of hp-ux from 10.something. There's a 33.6 serial modem being used for dialing out on tty0p1 which was running at acceptable speed (19.2) previously.
So the modem is the same, the software is the same, but we changed the hardware and the os, and it's struggling now at 9.6.
Is there any port settings which may have an effect on the speed? I've tried almost every combination of AT commands, but can't help it.
We've also checked the /usr/lib/uucp/Devices file, but nothing was set in it.
thank you
We've recently upgraded to this version of hp-ux from 10.something. There's a 33.6 serial modem being used for dialing out on tty0p1 which was running at acceptable speed (19.2) previously.
So the modem is the same, the software is the same, but we changed the hardware and the os, and it's struggling now at 9.6.
Is there any port settings which may have an effect on the speed? I've tried almost every combination of AT commands, but can't help it.
We've also checked the /usr/lib/uucp/Devices file, but nothing was set in it.
thank you