Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Port Security

Status
Not open for further replies.
merios

merios

Technical User
Jun 4, 2003
34
AU
I have a 6509 which I have configured for VMPS.
When I configure port membership to dynamic to participate I have the problem that on my large network, some users might decide to patch in a hub on that port. When I tested a hub connected to that dynamic port, I patched in 2 nics both known in the VMPS database - the first (call it A), denied (none) and the second (call it B) put in VLAN7. Although, when I patched B first and A second, then removed B the dynamic port still reported to be configured to VLAN7. What I want is to be able to have one mac per port whilst still having the functionality of Dynamic VLANs.

Anyone have any ideas?

thanks

merios
 
Status
Not open for further replies.

Similar threads

Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
118
Zero6
Zero6
Gartech
  • Locked
  • Question
LAN Port Test Device
Replies
3
Views
117
ipohead
ipohead
BleuBell
  • Locked
  • Question
Command Rejected : Exceeded NNI ports Allowed
Replies
0
Views
82
BleuBell
BleuBell
amelamel
  • Locked
  • Question
port has faulty link
Replies
2
Views
279
ADB100
ADB100
CDIV
  • Locked
  • Question
Use uplink port as access port 2960 1
Replies
9
Views
277
CDIV
CDIV

Part and Inventory Search

Sponsor

Back
Top