Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Port Mirroring on Extreme Alpine 3808
- Thread starter MBLR
- Start date
I haven't done port mirroring on alpine, but I have on Black Diamonds, Summit48i and Summit24e3's. So I believe that it should be pretty much the same.
There are 2 commands
enable mirroring to port #:# -sniffer, ids, tap ,etc
configure mirroring add port #:# -port to be monitored
The port that is enabled to be the mirrored port (sniffer), will be removed from whatever vlan it is currently attached to and when port mirroring is disabled you will need to add it back to a vlan. This port can't be used for normal network usage at the time that it is mirroring the port.
Hope this helps.
There are 2 commands
enable mirroring to port #:# -sniffer, ids, tap ,etc
configure mirroring add port #:# -port to be monitored
The port that is enabled to be the mirrored port (sniffer), will be removed from whatever vlan it is currently attached to and when port mirroring is disabled you will need to add it back to a vlan. This port can't be used for normal network usage at the time that it is mirroring the port.
Hope this helps.
- Status
Similar threads
- Locked
- Question