Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

port 113 closed how to stealth

Status
Not open for further replies.

pechenegs

MIS
Jun 15, 2003
1,040
0
0
GB
hi, i have installed mandrake 10 and used the built in firewall , shorewall, but port 113 is closed but responding to tcp, how do I stealth this port? I'm a newbie to linux so, if anyone could give me the command s?

thx pech
 
.
.
First off, goto and run a stealth test.

About half the way down the opening page, you'll find the ShieldsUp! link - click on it, and follow the instructions, which will bring you to the third page.

you'll see some options to choose what ports you want scanned, choose file sharing, service ports and common ports.

Then, you'll see what others can see on the Internet, it could be that only your system sees 113 -

Then, you can goto the Control Center on your system, choose security, and click on the next higher level, if you think you need it....


Gnasty
.
.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top