Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Polycomm not working with SIP
- Thread starter djungheim
- Start date
EmuDan
Technical User
- Apr 21, 2011
- 219
Are you sure the ATA is running SIP? With an analog phone connected to port 1, lift the handset, then press the function button on top of the ATA. Press 123# on the phone and when it tells you the version number, it should also tell you what protocol is running on the unit.
Dan
Dan
Is the ATA registered on your SIP server (if not you may be onto a looser to start with).
Next, what CODEC are you running? I'd go with g711a/u and start from there.
Do your timings match i.e. even if running G711 for example, are the server / client timings the same?
Robert Wilensky:
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true.
Next, what CODEC are you running? I'd go with g711a/u and start from there.
Do your timings match i.e. even if running G711 for example, are the server / client timings the same?
Robert Wilensky:
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true.
- Status