Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Polycomm configured as 2616 1

Status
Not open for further replies.

vicentell

Technical User
Sep 18, 2003
84
MX
Hi Everyone
I have a digital polycomm, Iconfigured as 2616 for some reason every morning is disable, and I have to enable it.
is there something wrong with it configuration?
please take a look ..

TN 11 1
DATE
PAGE
DES

DES DIR
TN 011 0 00 01
TYPE 2616
CDEN 8D
CUST 0
AOM 1
FDN
TGAR 1
LDN NO
NCOS 2
RNPG 1
SCI 0
SSU 0001
LNRS 16
XLST
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTD FND HTA ADD HFA
MWD LMPN RMMD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUA DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD DELD CFHD FICD NAID BUZZ
UDI RCC HBTD AHA DDGA NAMA PRSD NRWD NRCD NROD
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTC MCBN
CPND_LANG ROM
HUNT 7000
LHK 3
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 5701 0 MARP
CPND
NAME Direccion gral.
XPLN 24
DISPLAY_FMT FIRST,LAST
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
DATE 19 FEB 2004

thanks in advance for your help
 
There is a digital polycom specifically for Meridians and I'm guessing it needs to be built as a 550. See the following links for further information. You may need a specific patch to allow this in your switch. My current configuration will not let me build a 550 set, only a 500. Good Luck.

 
IF THE SWITCH IS AN OPTION 11 TAKE LD 30 OUT OF THE DROL IN LD 17

OLD ROLMEN WORKING ON NORTELS
 
For clarification for McGruff753, the digital Polycom needs to be built as a 2616 with the conf button progamed onto key 3. As perrypj says LD30 will disable the port if you switch the polycom off overnight. If the unit is left in the same room all the time I would be tempted to leave it tuned on. Depending on firms policy of course.


PD-S


---------------------------------
PDulfo aka pdiddy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top