I have noticed that SIP device call processing changed dramaticaly in V9. So Polycom is not working any more as it use to work. Transfer is working fine, but it disconnects Polycom and it is not possible to use a feature code for conferencing. As a work around we create conference from a deskphone, join polycom and then hang up. We have deployed lots of polycoms which worked just perfect in V.8 and now stopped. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Polycom IP6000 (IP4000, IP7000) Conferencing
- Thread starter slapin
- Start date
- Thread starter
- #3
It is SIP. There is no flash button. It use to work using the same logic. When you press transfer button, SIP phone would put the third party on hold and let you enter a feature code which will connect all parties on hold into a conference. Now it will complete transfer and disconnect SIP phone from the original call and place a new one.
- Status
Similar threads
