does it make a difference if the wires are reversed on the opposite ends of the line cords - just took out a Partner ACS and put in a single pair ESI system - i reused the old straight through (I believe) line cords - the ones that come with the phones have the red and green wires in different positions on each end - i have also run across 2 pair line cords with a pair reversed - any thoughts / help would be appreciated
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
polarity on line cords an issue?
- Thread starter upstateny
- Start date
TouchToneTommy
Vendor
On a Partner, the polarity of the individual pairs does not matter, just don't swap the actual pairs.
No telling on the ESI single-pair system. Test it at the backboard with jacks wired up both ways to see if it is an issue.
No telling on the ESI single-pair system. Test it at the backboard with jacks wired up both ways to see if it is an issue.
- Status
Similar threads
- Locked
- Question
- Locked
- Question