rerichards
Programmer
I am having trouble getting entity objects to glue. I do not want to static glue, but instead I am creating custom connection points, using a dynamic connector.
Once I create a creation point on each entity, I then select the dynamic connector and drag it over to the connection point on ENTITY_1. A red square pops up and the dynamic connector is glued to ENTITY_1. If I move ENTITY_1 around the dynamic connector remains fixed to the connection point. However, when I place the other end of the dynamic connector on ENTITY_2 (the same red square lights up), and both ends of the dynamic connector, connecting ENTITY_1 and ENTITY_2 are red, when I move ENTITY_2 the dynamic connector does not remain glued to ENTITY_2.
The odd thing is that sometimes it does remain glued, but other times not. What am I missing? How can I get ENTITY_2 to always remain glued using custom connection points and point to point gluing?
Once I create a creation point on each entity, I then select the dynamic connector and drag it over to the connection point on ENTITY_1. A red square pops up and the dynamic connector is glued to ENTITY_1. If I move ENTITY_1 around the dynamic connector remains fixed to the connection point. However, when I place the other end of the dynamic connector on ENTITY_2 (the same red square lights up), and both ends of the dynamic connector, connecting ENTITY_1 and ENTITY_2 are red, when I move ENTITY_2 the dynamic connector does not remain glued to ENTITY_2.
The odd thing is that sometimes it does remain glued, but other times not. What am I missing? How can I get ENTITY_2 to always remain glued using custom connection points and point to point gluing?