POE device class for 4600, 9600, 1600 series IP phones

[fbs003]

Does anyone have a table or list of the power consumption class ratings for connection to a poe switch for the 4600, 9600 and 1600 series IP phones.
I've found the 4600's on the avaya site but not the others.
No biggie but I did a quick calc using 24 class 2 and 24 class 3 on a cisco 48 switch and it came up at 71% so I'd be worried using 48 class 3's on it.

thread690-1241629 has the 4600's as well reproduced below. (thanks Big70).

Avaya tells me all 9600's and 1600's are class 2 but I don't trust them.

Thanks guys

Phone
Typical
Worst Case
IEEE 802.3af

4601, 4602, 5601, 5602
3.5W
4.6W
Class 2

4602SW, 5602SW
4.1W
5.0W
Class 2

4606, 4612, 4624
5.0W
6.4W
Class 0

4610SW, 5610
4.0W
6.0W
Class 2

4620
7.7W
9.9W
Class 3

4620SW, 4621SW, 5620
5.9W
8.0W
Class 3

 

[fbs003]

Found a good whitepaper on this which has the 9600's which shows all class 2's but also states that the best way to implement is not by class but by actual usage so again, I'd like the actual usage of the 1600's.

White Paper

http://203.166.38.45/Micko/stuff/Avaya - Practical Guide to PoE v1.1.pdf