POD Not Working

[mbrio]

I have an analog programmed as a SCR on two digital 3904's. They are able to pick up the calls at the same time. Should I just delete the key and reprogram it?

POD is set on both phones and there are other analogs programmed as SCR on those phones that this does not happen.

Any thoughts?

 

[johnpoole]

i've always taught that adding an analog to the mix makes the scr a party line.. i've never seen one that did not.. when i need a private line on a mix i use mcr keys.. but i use mcr most of the time.. if people cannot transfer, they need a key system..

john poole
bellsouth business
columbia,sc

 

[mbrio]

That is not good to hear. Our system must be funked up. I tried adding it as an mcr and got sch0369--Function conflicts with existing call arrangement.
I deleted the scr off of both phones, thinking that was the issue, but it won't let me program it in.

 

[GHTROUT]

What JP is saying is, you have an analog TN programed with that DN that lost its privacy. You have to get rid of the Analog TN first.

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[FireFighter78]

you cannot mix MCR with an analog DN.

 

[GHTROUT]

You can now, if the analog TN has CLS MCRA

[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too

 

[FireFighter78]

I forget that I am an "expert" on outdated equipment.

 

[mbrio]

I keep getting the error that it can't exist with the current arraingment. I think they are going to have to live with this one. thanks for help.

 

[StanleySteamer]

mbrio - If you want to change from SCR to MCR then you will have to out all appearances of the existing SCR appearances, or change them temporarily to another DN. Then you should be able reprogram as MCR.