I have added the card ta82461 to allow it to wring my phones but i am not sure how to get it to actually wring my phones. I see two phone jacks is that the wiring from the door bell buttom or does that connect to a jack in the main card? Also when i press the button by the door i hear it - sounds like a dial tone-
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
pnansonic kx-ta824
- Thread starter bennuss
- Start date
WhiteGooner
Programmer
2 RJ11 ports on card are for 4 door phones 1 and 2 on first jack 3 and 4 on the other jack
Pins 2 and 3 for door phone 1 and pins 1 and 4 for door phone 2
Same for door phone 3 and 4
Wire blocks for openers, would suggest the installation manual if you can get
You will need to program where the different door phones ring.
Pins 2 and 3 for door phone 1 and pins 1 and 4 for door phone 2
Same for door phone 3 and 4
Wire blocks for openers, would suggest the installation manual if you can get
You will need to program where the different door phones ring.
- Status
Similar threads
- Locked
- Question