Plz Help to connect two ns500 ,different buildings via an local network 1

[Ibrahim.ye]

Hello everyone,
First I apologize for my English, which is not my mother language.

I have two offices in two different buildings, knowing that the two buildings have a direct connecting by local network connection via Fiber.

I have an ns500 in both buildings and I want to connect them so that anyone can call from their office to anyone in the other building.( analog telephone) not ip.

I try by using QSIG

https://youtu.be/Lk6jYlLTmcY?si=ow8kRxaB9BHIjGv5

But its not working.


I need help plz

 

[omonat]

You have IP Trunk LIC in both systems?

wanetelecoms@gmail.com

 

[Y-Obuka]

why sip?! license for any type of trunk, sip or h.323
there must be an even number of them. 2,4,6,8,10.... 128...

 

[Ibrahim.ye]

Thank you omonat for replying

I don't have any license

I'm able to connect now, but not completely,I can only call numbers from 200 to 299 It rings and I can hear the other end, otherwise numbers it is not possible. it give me Busy ringtone.


I Use V-IPGW In both devices,

 

[rayane83]

You must have sip trunk licence for both ipbx
and DSP card
then you'll make the both ipbx as one ipbx and calling from the first to the second as one pbx

 

[aberin]

You need DSP Card on both NS-500. Then upgrade both PBX to Ver. 9