PLEX knowledge wanted

[NANSI]

Hi all, I previousely posted a scriptfile for WinFiol to clear any hungup extension in BC8 to BC10. To be able to create a script that goes for BC11, I need someone that has PLEX information and can get the right dataadreses to print from the MD110.

Hope tho hear from someone!

NANSI

 

[mdfan]

patcher knows ....

 

[NIUX]

Hi NANSI,

Find below the changes between BC10 and BC11

BC10
UNIT=DER,RELOFF=C&D
UNIT=KLP1T1,DSOFF=93
UNIT=KLP1O,DSOFF=19&&1C

BC11
UNIT=DER,RELOFF=4D&4E
UNIT=KLP1T,DSOFF=95
UNIT=KLP1O,DSOFF=1E&&21

I hope it helps.
Is it possible to post the updated script in English ?

BR///

 

[patcher]

Hello NANSI, I dont understand what you want to accomplish here. What do you mean "to clear any hangup extension"? I dont use script on winfiol. I just rather use SUSIP, SACOP and FT/SG command since you don't know where is the corruption located. //patcher

 

[NANSI]

My scipt is actually checking for faulty queues to an extension. When the extension has queue, you can´t delete the extension.

I´m checking queues for DTS, EL6 and EL7 extensions. I have some adresses to print in BC8,9 and 10 for this and I would like to get the correkt adress in BC11 as well.
NIUX has already delivered the adresses, THANKS NIUX.

For a DTS extension in BC9 this goes:

print SUSIP and check the POINT for DERS1.
Then get the pointer for FILNO=2.
SACOP:LIM=X,UNIT=DERS1,FILNO=1,POINT=YY,RELOFF=A&B;
Check the status with:
SACOP:LIM=X,UNIT=DERS1,FILNO=2,POINT=ZZ,DSOFF=0;
DATA for DSOFF=0 ahould be 40 for a free extension. If it´s not free you can SACOS with:
SACOS:LIM=XX,UNIT=DERS1,FILNO=2,POINT=ZZ,DSOFF=0,DATA=40;
Chech the queue with:
SACOP:LIM=X,UNIT=DERS1,FILNO=2,POINT=ZZ,DSOFF=1;

Also chech USERSTATE with:
SACOP:LIM=X,UNIT=KLP1T1,FILNO=2,POINT=YY,DSOFF=48;

Also chech the SERVICESTATE with:
SACOP:LIM=X,UNIT=KLP1O,FILNO=1,POINT=YY,DSOFF=17&&1A;

What I need is the parameters for BC11:
DIRNO in FILNO=1 to show the extension number,(RELOFF=4&&7 for BC10)

RLINPTR in FILNO=1 to print the POINTER in FILNO 2 (RELOFF=C&D for BC10)

LINSTA in FILNO=2 to show status (DSOFF=0 in BC10)

RQUEPTR in FILNO=2 to show pinter to queue (DSOFF=1 in BC10)

USERSTATE in FILNO=2,UNIT=KLP1T1 (DSOFF=93 in BC10)

SERVICESTATE in FILNO=1,UNIT=KLP1O (DSOFF=19&&1C in BC10)

By doing this check in a scriptfile it´s much easier for everyone do do the check.

I will translate the scipt into english when I have the time. I have a lot on my mind right know but within 2 weeks it will be OK I guess.

NANSI