Please Help with Creating Extensions! (TLU Trace Provided)

[grinchstyle]

Hi,

I have a lab setup with an MD110 connected to a simulated PSTN network via a DSS1 link. The PSTN is currently configured for D.I.D only (to MD110) for testing purposes. We have initaited a signalling connection between the equipment, the only issue that I have is creating an extension. I have searched and ran through a number of commands but I get an "unassigned number" response from the MD110 to the simulated network. Below is a TLU trace of the call. Thanks and any help would be appreciated.

11.38.17.200
<- Incoming
Call Reference: #02D
Message: SETUP
Bearer Capability
Coding Standard: CCITT
Information transfer capability: Speech
Transfer mode: Circuit mode
Information transfer rate: 64 kbit/s
User information layer 1 protocol: CCITT G.711 A-Law
B-Channel: 26
Calling Party Number
Type of number: International number
Numbering plan: ISDN/telephony numbering plan
Presentation indicator: Presentation allowed
Screening indicator: User-provided, verified and passed
Digits: XXX5551100301
Called Party Number
Type of number: National number
Numbering plan: ISDN/telephony numbering plan
Digits: 7035551000
High Layer Compatibility

11.38.17.280
-> Outgoing
Call Reference: #02D
Message: CALL PROCEEDING
B-Channel: 26

11.38.17.360
-> Outgoing
Call Reference: #02D
Message: DISCONNECT
Cause: Unallocated number

11.38.17.380
<- Incoming
Call Reference: #02D
Message: RELEASE

11.38.17.400
-> Outgoing
Call Reference: #02D
Message: RELEASE COMPLETE

 

[whosrdaddy]

your number conversion table must be correct.
I suppose your extension nr is 1000:

nutri:entry=7035,cnvtyp=0,numtyp=2,trc=6; /*digits 703555 will be truncated, leaving you number 1000 */

//daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[grinchstyle]

Thanks a lot.. got it working.

 

[grinchstyle]

Any input as to how i can configure this extension to dial into the simulated PSTN? I have modified the DSS1 link for bi-directional opertation but I dont know what steps to take to dial out of the PBX. Thanks.

-grinch

 

[whosrdaddy]

you need to create an external destination :

NANSI:NUMSE=0,NUMTYP=ED;

RODDIEST=0,srt=2,rou=x;

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[grinchstyle]

Works like a charm again!! ur awsome dude..

-Later

 

[techtip2]

Actually on that point im having dificulty deleting a nutri number can some one post the command for me please.

thanks guys

 

[whosrdaddy]

like:

NUTRE:ENTRY=x;

?

you can add cnvtyp and numtyp also if you have duplicate entries...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!