Please Help with Config

[Novelluser]

Hi Folks,

I have been given the task of replacing our current firewall with a cisco PIX 515e. I have a 100 user network 192.168.1.x /24 and I have one public IP address: 217.X.X.102 /252. Can somebody please give me some pointers or even a sample config of what I should do. I have beginner knowledge at cisco command line. I will obviously have to use NAT/PAT but am not sure what addresses to us.

Any help would be much apprectiated.

 

[KiscoKid]

One of the forum users here has written a FAQ to get a PIX up and running. The linkis below - hopefully it proves useful. Drop a line if you still can't get it working.

http://www.tek-tips.com/faqs.cfm?fid=6029