Please help me find Canon PS XJs 700-800 driver

[henrypuma]

Hello All

Can anybody help me locate the following driver, I have tried the manufacturers website but it is no longer available...
Driver name: "PS XJs 700-800" (for a Canon CLC900)for the following Operating System: Windows NT Server.
I would be very grateful..

Thanks

 

[UncleRick]

The driver is for the RIP and not the copier. do you know which RIP you have?
the following RIPs will work with that printer:
500, 550, 1000, 5000, 2000+, 3000+, 4000+, M20e, M20, NET, PS-A1, v30, v50

 

[henrypuma]

Thanks a million for replying, I don't know the exact name
of the RIP, but I do know that this is the only driver that will work with the RIP in question,
The RIP is built into the bottom right of the machine if this helps?
Thanks

 

[UncleRick]

You have two options for the embedded RIP. The PSA1 and the M20e. To tell which one you have open the pedistal door and look at the 100 pin connector (copier interface). If it is vertical you have a PSA1, if it is horizontal you have a M20e.

A quick look at driver downloads on

http://www.canon.ca

shows drivers for the M20e include 9x,me,NT4, and 2000. For the PSA1 there are 9x,me,2000

I hope this helps.