Hello,
I have a problem, i'm trying to set-up a server to server VPN, or in other words trying to connect two lan's over the internet. server(1) is setup to accept incoming VPN calls, server(2) is setup to make a VPN connection with server(1).
The general idea is that the workstations on the two lan's can be reached from either direction.
server(1)= 192.168.1.2 using RRAS
server(2)= 192.168.0.2 using RRAS with dialondemand
when a workstation located on the lan with server(2), the server starts to connect with server(1). this works fine, the connection is made and remains, but when i try to reach a workstation on the lan of server(1) eg. 192.168.1.4 i get no respons, but when i'm on the server(2) i can ping the entire lan on server(1) and server(2) but the workstations on server(2) cannot reach the workstations on server(1).
I only need for server(2) to connect to server(1) when needed, not the otherway around, and i want the workstations on server(2) to reach the workstations on server(1), and also not the other way around.
Hope somebody can help me, sorry if it is a bit messy what i'm trying to say, but i can't write it any other way.
Thanks in advance,
Donkie
ps. i'm using ADSL on both ends. without firewall or NAT
I have a problem, i'm trying to set-up a server to server VPN, or in other words trying to connect two lan's over the internet. server(1) is setup to accept incoming VPN calls, server(2) is setup to make a VPN connection with server(1).
The general idea is that the workstations on the two lan's can be reached from either direction.
server(1)= 192.168.1.2 using RRAS
server(2)= 192.168.0.2 using RRAS with dialondemand
when a workstation located on the lan with server(2), the server starts to connect with server(1). this works fine, the connection is made and remains, but when i try to reach a workstation on the lan of server(1) eg. 192.168.1.4 i get no respons, but when i'm on the server(2) i can ping the entire lan on server(1) and server(2) but the workstations on server(2) cannot reach the workstations on server(1).
I only need for server(2) to connect to server(1) when needed, not the otherway around, and i want the workstations on server(2) to reach the workstations on server(1), and also not the other way around.
Hope somebody can help me, sorry if it is a bit messy what i'm trying to say, but i can't write it any other way.
Thanks in advance,
Donkie
ps. i'm using ADSL on both ends. without firewall or NAT