Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PLAR and the 8841 1

Status
Not open for further replies.

Daniel.K

Technical User
Mar 2, 2017
3
US
I have a 7942 set on my desk and everything with the PLAR works great any time i access the line it dials out, and it receives calls just fine.

However

When I add the numbers to an 8841 with all the same settings the 8841 returns dial tone when you select the line and go off hook with the handset, with the speaker button, or the session button.

But

If you select the line key then go to the second page of soft buttons and press the "Pickup" soft key the line dials the PLAR assigned number. Is there a way to have it dial the PLAR number no matter what way you activate the line?
 
Thank you for that information it led me to the path hat i needed to finish up the phone project i was working on
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top