Jamiedstar
Technical User
Hi there...
Seem to be having Signal Strength problems with a Planet 1900 Access Point.
The card inside is a prism 2 and samsung chipset.. me thinks
Im using an intel anypoint usb and pcmcia card to connect via infrastructure mode but the signal strength is very irratic jumping from full to zero strength every 5 seconds..?? This is very irritating as it was disconnecting all of the time and my connection speed is appauling
(This is from 0 metres!!)
If i connect the two intel cards together using ad-hoc mode they are great but i need the access point to use my broadband connection..
Any ideas or help would be greatly appreciated
Make Planet
Model 1900 AP
Firmware v3.0
Seem to be having Signal Strength problems with a Planet 1900 Access Point.
The card inside is a prism 2 and samsung chipset.. me thinks
Im using an intel anypoint usb and pcmcia card to connect via infrastructure mode but the signal strength is very irratic jumping from full to zero strength every 5 seconds..?? This is very irritating as it was disconnecting all of the time and my connection speed is appauling
(This is from 0 metres!!)If i connect the two intel cards together using ad-hoc mode they are great but i need the access point to use my broadband connection..
Any ideas or help would be greatly appreciated
Make Planet
Model 1900 AP
Firmware v3.0
