PL 5500 Array problems

[cyruss612]

Hello everyone, I was hoping you would be able to answer a question of mine. I have a Compaq Proliant 5500 with the 320 scsi array. My question is that when I start the server with the smart start 5.4 cd and go to figure array, it is telling me to insert the 3-1/2 disk. What 3-1/2 disk , my smart start only came with cd's no 3-1/2 . Please any help would be greatly appreciated.
Thanks,
Cyruss

 

[itsp1965]

Cyruss, is it when you are configuring the array or when you begin hardware installation. What I think it is looking for is the server profile diskette.

 

[cyruss612]

It is when I am doing hardware installation, I cant seem to even get to the part to configure the array.

 

[itsp1965]

Therefore it is probably looking for the diskette. Are you prompted to insert the Server Hardware Profile Diskette? you will need to continue on. Like I said it can be downloaded off the HP website.

 

[ntinlin]

Or create a blank file on a blank floppy and call it spd.ini


Neill

 

[ntinlin]

Sorry, call the file spd.ini not the disk