PIX520 configuration guide 1

[burtsbees]

Instead of me asking a bunch of questions, does anyone have a good link to a PIX520 config guide, version 6.3?
I also wanted to know how to bring an interface up...administratively down, line protocol up...help!

Burt

 

[burtsbees]

Figured out the no shut...
interface ethernet0 auto
ha ha---I kept trying
interface ethernet0 auto no shutdown
and
no interface ethernet0 auto shutdown

I still need that config guide, though, if anyone can help...thanks.

Burt

 

[Supergrrover]

Here is the end all link from Cisco. Pretty much everything you want to do is in there.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html

It will take a while to get used to the PIX OS verses the IOS but it shouldn't take you long.

To bring up the interface you want to
no interface <ID> shutdown

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/gl.html#wp1075586

Hope this helps.



Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[burtsbees]

I tried that, and it just gave me the possible parameters...I thought that
interface ethernet0 auto
did it...thanks for the link!

Burt

 

[Supergrrover]

To bring up the interface you are right,
interface <HardwareID> auto
blending 6 and 7 code in my head is not a good idea.


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[burtsbees]

Ah...so it is 7.x code then...interesting...is 6.3 the latest I can put on this box?

Burt

 

[Supergrrover]

The 520 only goes to 6.3(5).

http://www.cisco.com/en/US/products..._tech_note09186a00804708d8.shtml#relatedprods

Brent
Systems Engineer / Consultant
CCNP, CCSP