PIX506E/W2K/VPN

[EduardoA]

I am new to VPN. This is what I am trying to accomplish.

VPN Client 3.5 ----- PIX506E ----- W2K ----- Network

What is the best way to set this up?

I am currently using PAT on my firewall (only 1 IP), if more IPs are neccessary, I can try getting more.

I have about 20 remote users that need to VPN into the network and synchronize e-mail (Outlook/SBS2000 Exchange)


Any help would be greatly appreciated.

Eduardo

 

[rsivanandan]

Have a look at this link, I guess this will answer your question. One IP is fine.

http://www.cisco.com/en/US/partner/...er_guide_chapter09186a00800898ed.html#xtocid0

This is IPSEC VPN and is the best one.

Hope this helps...

Cheers,
Rajesh

 

[EduardoA]

Rajesh,

Thanks a lot for your reply. Unfortunately, I do not have a CCO login ID and password. I've tried getting one thru my vendor with no luck.

Is there any other link that might help me?

Eduardo

 

[EduardoA]

Can someone send me a copy of the link above?

laptopmaster@hotmail.com

Thanks..