PIX506+PDM totally no response, desperate!

[tuupje]

Hi,

I recently bought a cisco pix 506 and upgraded to PIX software 6.3.5 and the PDM version to 3.04 (see show version). The strange thing is I just cannot get the PDM working. As soon as I start a webbrowser https session from a host in the 192.168.1.0 lan to the pix 192.168.1.1 I just receive the message from the browser "Internet Explorer cannot browse the webpage", also other browser gave me the same error. I can ping the pix from the hosts in the 192.168.1.0 lan segment. Not even the message regarding the security certificates is showing up.....Using a portscan tool to scan the pix I can see 433 is open.

Please help.....!!!!!

pixfirewall# sh version

Cisco PIX Firewall Version 6.3(5)
Cisco PIX Device Manager Version 3.0(4)

Compiled on Thu 04-Aug-05 21:40 by morlee

pixfirewall up 2 hours 36 mins

Hardware: PIX-506, 32 MB RAM, CPU Pentium 200 MH
Flash i28F640J5 @ 0x300, 8MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0007.50b7.05c6, irq 11
1: ethernet1: address is 0007.50b7.05c7, irq 10
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 2
Maximum Interfaces: 4
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited

Complete config:

PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxx encrypted
passwd xxxxxxxx encrypted
hostname pixfirewall
domain-name ciscopix.com
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
logging on
logging console informational
logging monitor errors
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute retry 4
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
ntp server 204.9.53.11 source outside prefer
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 15
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username xxxx password xxxxxxx encrypted privilege 15
terminal width 80
Cryptochecksum:xxxxxxxxxxx
: end
pixfirewall#

 

[Viconsul]

You need to set your pdm location to your internal lan.

pdm location 192.168.1.0 255.255.255.0 inside

 

[tuupje]

Hi, thanks for the quick reply.

I did add this line to the config but the problems is still the same, so no luck at all....

 

[Viconsul]

Do you have java installed on the pc?

 

[tuupje]

Hi again,

Yes Java6 update 20 is installed on the machine. Tested with Windows 7 and Windows Xp machine.

 

[tuupje]

Did also some debugging on the console when starting the https sessions to start PDM from the pc with ip 192.168.1.30

710001: TCP access requested from 192.168.1.30/49293 to inside:192.168.1.253/https

So it seems that access is granted, but still no PDM webpage is being displayed. I also tried re-flashing the pdm.

Is there some way to see if PDM is correctly running????

 

[tuupje]

The clearify the problem:

The PDM JAVA plugin does not even initialize when i request it using the

https://pixipaddress

Is seems likethe PDM application is not even listening to the request