I have set up several Pix to Pix VPN tunnels, but I now have a problem. One office division cannot use DSL or other forms of broadband, so I want to use a pix501 (as a VPN hardware client)through a Cisco 801 ISDN router with a dial-up internet connection.
The router is configured, but I just can't seem to get traffic from the pix through the router. Is this a NAT problem or am I missing something else?
Cisco Pix 501--->Cisco 801---->Internet<---Cisco Pix 506
I have one subnet on the inside of the 501 and another on the outside (same subnet as the 801 inside interface)...
The router is configured, but I just can't seem to get traffic from the pix through the router. Is this a NAT problem or am I missing something else?
Cisco Pix 501--->Cisco 801---->Internet<---Cisco Pix 506
I have one subnet on the inside of the 501 and another on the outside (same subnet as the 801 inside interface)...