The VPN is setup. Windows 2000 clients can authenticate and browse the internal network. However, when connected to the VPN, they cannot browse the web, check email, etc... If I unselect the "Use remote network default gateway" in the VPN client settings, then they can connect to the VPN, browse the internet, check email, etc..., but they cannot ping or connect to internal network clients. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PIX VPN w/ Windows 2000 Client Error
- Thread starter rstephan
- Start date
HI.
This is a known problem with PPTP connections to the pix.
The best solution is to upgrade your VPN to IPSec and the VPN Client from CISCO.
It has the "split-tunnel" option just for solving this problem.
Bye
Yizhar Hurwitz
This is a known problem with PPTP connections to the pix.
The best solution is to upgrade your VPN to IPSec and the VPN Client from CISCO.
It has the "split-tunnel" option just for solving this problem.
Bye
Yizhar Hurwitz
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
