PIX VPN Client issue.

[andyjo]

I am trying to get a VPN client 1.1 to work with a PIX 5.1 firewall. I have the PIX configured per the Cisco website. When I try to ping a inside host from the remote client running the VPN client I get in debug on the PIX.

crypto_isakmp_process_block: src 63.107.115.157, dest 216.236.81.125
OAK_MM exchange
ISAKMP (0): processing SA payload. message ID = 0

ISAKMP (0): Checking ISAKMP transform 1 against priority 8 policy
ISAKMP: encryption DES-CBC
ISAKMP: hash MD5
ISAKMP: default group 1
ISAKMP: auth pre-share
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR
return status is IKMP_NO_ERROR
ISAKMP (0): retransmitting phase 1...
crypto_isakmp_process_block: src 63.107.115.157, dest 216.236.81.125
ISAKMP (0): retransmitting phase 1...
crypto_isakmp_process_block: src 63.107.115.157, dest 216.236.81.125
ISAKMP (0): deleting SA
ISADB: reaper checking SA 0x810f6bc8, conn_id = 0 DELETE IT!

crypto_isakmp_process_block: src 63.107.115.157, dest 216.236.81.125
OAK_MM exchange
ISAKMP (0): processing SA payload. message ID = 0

ISAKMP (0): Checking ISAKMP transform 1 against priority 8 policy
ISAKMP: encryption DES-CBC
ISAKMP: hash MD5
ISAKMP: default group 1
ISAKMP: auth pre-share
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR
return status is IKMP_NO_ERROR
ISAKMP (0): retransmitting phase 1...
ISAKMP (0): retransmitting phase 1...
ISAKMP (0): deleting SA
ISADB: reaper checking SA 0x810f6bc8, conn_id = 0 DELETE IT!

Any ideas to what this means?? Thanks in advance for any info.