Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

pix vpn client - able to connect using vpn client but cannot ping

Status
Not open for further replies.

pe54608

Technical User
Mar 28, 2012
1
0
0
I am trying to create a vpn client solution using a pix 501. I am able to create a vpn connection but cannot ping other hosts on the inside interface of the firewall. Any help would be appreciated.

<-----Running Config------>

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.03.28 15:44:58 =~=~=~=~=~=~=~=~=~=~=~=


User Access Verification

Password:
Type help or '?' for a list of available commands.



rc-pix501-1# sh run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxx encrypted
passwd xxxxxx encrypted
hostname rc-pix501-1
domain-name abc.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
<--- More --->

names
access-list in2out permit ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 10.0.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool clientpool 10.0.2.10-10.0.2.30 mask 255.255.255.0
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list in2out
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
<--- More --->

aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 172.17.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
crypto ipsec transform-set trset2 esp-aes-256 esp-md5-hmac
crypto dynamic-map ipsec_map 1 set transform-set trset2
crypto map outside_map 65535 ipsec-isakmp dynamic ipsec_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp nat-traversal 20
isakmp log 25
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption aes-256
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
<--- More --->

vpngroup remoteClient address-pool clientpool
vpngroup remoteClient dns-server 8.8.8.8
vpngroup remoteClient default-domain abc.com
vpngroup remoteClient split-tunnel in2out
vpngroup remoteClient split-dns abc.com
vpngroup remoteClient idle-time 1800
vpngroup remoteClient password ********
telnet 0.0.0.0 0.0.0.0 outside
telnet 10.0.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 10.0.1.10-10.0.1.30 inside
dhcpd dns 8.8.8.8
dhcpd lease 3600
dhcpd ping_timeout 100
dhcpd enable inside
dhcprelay timeout 60
username bill password xxxxx encrypted privilege 2
terminal width 80
Cryptochecksum:0cf867e3a00e16e2b5b5be04c12c419f
: end
 
Is your pix the default gateway for the devices you are trying to ping when connected to the VPN?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top