PIX VPN allow access to local LAN

[drbk563]

I setup VPN access on a PIX firewall, which will be using the Cisco VPN client to connect to it. When I initiate an connection to the PIX firewall. I am able to establish a connection to it. However, when I try to reach hosts in the local LAN I am not able too. I cannot even ping the different devices which are located behind the PIX. On the Cisco VPN client I did enable "allow local lan access" What configuration changes must I make?

Thank You

 

[Minue]

Hello
You should post a your config clean up,so the guys can see what's wrong.
Regards

 

[drbk563]

Below is the config for the PIX firewall.

Thank You

interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxx encrypted
passwd xxxxxxxxxxx encrypted
hostname PIXFIREWALL
domain-name xxxxxxxxx
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list allow_inbound deny ip 59.124.0.0 255.252.0.0 any
access-list allow_inbound deny ip host 24.71.105.183 any
access-list allow_inbound deny ip host 163.27.116.133 any
access-list allow_inbound deny ip host 218.189.179.82 any
access-list allow_inbound deny ip host 84.60.164.161 any
access-list allow_inbound deny ip host 222.128.34.89 any
access-list allow_inbound deny ip host 202.64.47.108 any
access-list allow_inbound deny ip host 87.162.179.31 any
access-list allow_inbound deny ip host 70.255.106.164 any
access-list allow_inbound permit tcp any interface outside eq 49156
access-list allow_inbound permit udp any interface outside eq 49156
access-list allow_inbound permit tcp any host B.B.B.236 eq 9563
access-list deny_outbound deny tcp any host 63.236.240.73 eq https
access-list deny_outbound deny tcp any host 209.202.9.7 eq https
access-list deny_outbound deny tcp any host 63.236.240.73 eq www
access-list deny_outbound deny tcp any host 66.28.235.59 eq www
access-list deny_outbound deny tcp any host 204.245.86.77 eq www
access-list deny_outbound deny tcp any host 69.18.151.78 eq www
access-list deny_outbound permit ip any any
access-list 101 permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
logging on
logging timestamp
logging buffered debugging
logging trap notifications
logging host inside 10.1.1.23
icmp permit any echo-reply outside
icmp permit any information-reply outside
icmp permit any mask-reply outside
icmp permit any parameter-problem outside
icmp permit any source-quench outside
icmp permit any time-exceeded outside
icmp permit any timestamp-reply outside
icmp permit any unreachable outside
icmp deny any outside
mtu outside 1500
mtu inside 1500
ip address outside A.A.A.85 255.255.255.0
ip address inside 10.1.1.1 255.255.255.0
ip verify reverse-path interface outside
ip verify reverse-path interface inside
ip audit info action alarm
ip audit attack action alarm
ip local pool HomeVpnPool 192.168.1.1-192.168.1.254
pdm location 24.71.105.183 255.255.255.255 outside
pdm location 59.124.0.0 255.252.0.0 outside
pdm location 63.236.240.73 255.255.255.255 outside
pdm location 66.28.235.59 255.255.255.255 outside
pdm location 69.18.151.78 255.255.255.255 outside
pdm location 70.255.106.164 255.255.255.255 outside
pdm location 84.60.164.161 255.255.255.255 outside
pdm location 87.162.179.31 255.255.255.255 outside
pdm location 163.27.116.133 255.255.255.255 outside
pdm location 202.64.47.108 255.255.255.255 outside
pdm location 204.245.86.77 255.255.255.255 outside
pdm location 209.202.9.7 255.255.255.255 outside
pdm location 218.189.179.82 255.255.255.255 outside
pdm location 222.128.34.89 255.255.255.255 outside
pdm location 10.1.1.23 255.255.255.255 inside
pdm location 191.200.14.0 255.255.255.0 outside
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 101
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp B.B.B.236 9563 10.1.1.251 telnet netmask 255.255.255.255 0 0
access-group allow_inbound in interface outside
access-group deny_outbound in interface inside
route outside 0.0.0.0 0.0.0.0 216.254.64.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
aaa-server AuthInbound protocol radius
aaa-server AuthInbound max-failed-attempts 3
aaa-server AuthInbound deadtime 10
aaa-server AuthInbound (inside) host 10.1.1.23 nyc4u2me timeout 10
aaa authentication ssh console LOCAL
http server enable
http 10.1.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set myset esp-aes esp-sha-hmac
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap 10 ipsec-isakmp dynamic dynmap
crypto map mymap client configuration address initiate
crypto map mymap client configuration address respond
crypto map mymap interface outside
isakmp enable outside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption aes
isakmp policy 20 hash sha
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup Homevpn address-pool HomeVpnPool
vpngroup Homevpn split-tunnel 101
vpngroup Homevpn idle-time 1800
vpngroup Homevpn password xxxxxxx
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 10.1.1.0 255.255.255.0 inside
ssh timeout 60
console timeout 0
username vmr2 password xxxxxxxxxx encrypted privilege 15
terminal width 80
Cryptochecksum:18a423db5d29fad97e947b2c5278c145
: end

 

[Supergrrover]

Have you enabled on the pix?
Here is guide for 7x code version

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702992.shtml

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[Supergrrover]

Sorry, laggy posting.

I don't think you can have just local lan access for 6.x code. (I know it's possible with 7x and with the 3000.) You can have a full split tunnel that will only encrypt the VPN traffic and allow everything else.


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[drbk563]

I got it working now I was missing the "isakmp nat-traversal". Well anyway thank you for your help.

 

[Supergrrover]

Just to clarify-

You have a vpn client connected to your internal networks and they have access to their own local lan with just adding nat-transversal and no split tunnel?




Brent
Systems Engineer / Consultant
CCNP, CCSP