PIX V7.x ASDM help required - please help

[silpion]

I had a PIX 515E unrestricted with software version 6.3 installed.
I upgraded its memory prior to upgrade to software version 7.x.

I upgraded to v7.07

NOW I lost access to PIX management web server (PDM).

I read that there is no PDM now, but ASDM, fine... I still have access to nothing, whatsoever.

This PIX is not in production (yet), it is being tested, I have a laptop connected to its port 0, which I use to telnet to PIX, tftp upload, etc... (I called that interface "inside")

When accessing my PIX web interface through the laptop I do it by

https://A.B.C.D

as a result I get the usual security warning and then an alert about the certificate (so far so good), next I get a page saying HTTP - 404 file not found
(...not good)

http is enabled:
http server enable
http A.B.C.D X.X.X.X inside

there's a line stating:
asdm history enable


After this I upgraded software to version 8.02 and afterwards I generated crypto key like this

PIX(config)# crypto key gen rsa modulus 1024

still nothing...

can anyone help?


note: sh flash shows that I have no asdm.bin file around, is it a separate download which I have to tftp to my pix (and if so, please tell me how to "activate" it once there) or is it included in the pix802.bin (or pix707.bin) files and if so how can I put this to work?

I looked "hi and lo" on the web for info. None usefull found... Please help.

 

[LarryTheCucumber]

If you have a CCO login look at this doc.

http://www.cisco.com/en/US/customer/docs/security/fwsm/fwsm32/asdm52f/release/notes/asdm521f.html

 

[Supergrrover]

Did you copy the ASDM image to the device?

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml

Look for "Install Adaptive Security Device Manager (ASDM)" on the page.


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[silpion]

I understand now that I have to copy ASDM image to the PIX too, i.e. I have to (replace filenames as required):

copy tftp:asdm52.bin asdm52.bin
asdm image set flash:asdm52.bin

thanks for the help