PIX to PIX VPN Config...

[ecowarrior]

Please can someone direct me to a step by step configuration guide on how to setup PIX to PIX vpn using des/3des, cisco.com version seems not to do anything!

Thanks,

 

[jdl508]

Cisco version has all of the command and gives config examples. I also recommend the cisco press book cisco secure PIX firewalls however that does not get any deeper than standard cisco docs. Im assuming the cisco doc your referring to is this one

http://www.cisco.com/warp/public/110/38.html

Good luck
jdl508

 

[ecowarrior]

I have gone through those docs, online and hardcopy, i have also use the PIXSCRIPT tool, however i just cant seem to create a tunnel between my two PIX's.

Please HELP! i am desperate

Thanks for any help given.

 

[yizhar]

HI.

Can each pix ping the other?
Is there a NAT/Filter router in the way?
Check if ISP at any side is blocking ESP.
What OS version at each side?
Post here relevant config...

Do you get any syslog errors?

Checkout this document - ignore the checkpoint stuff but go down to the debug output and debug commands to use at the pix, which should be similar in a pix to pix situation:

http://www.cisco.com/warp/public/110/cp-p.html

And try looking here also:

http://www.cisco.com/warp/public/471/top_issues/vpn/pixvpn_index.shtml

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[ecowarrior]

Can each pix ping the other?
yes

Is there a NAT/Filter router in the way?
no

Check if ISP at any side is blocking ESP.
no block

What OS version at each side?
both 6.1(3)

Post here relevant config...