Pix to Pix to Pix plus VPN client

[bigdog1175]

Currently have hub and spoke setup Pix 525 at hub and (2)501 spokes (1) ASA 5505 everthing is fine. The issue is now I'm adding another site to this configuration that is going to be a second hub what would be the best setup for this? So my current setup is Site A is the central hub sites B,C,D all use resources at A I'm adding site E. Now B,C,D as well as A need to access resources at E what would be the best case scenario? Any, input is welcome.

 

[Supergrrover]

Just add tunnels on all the other devices to the new site E. As long as it has a separate network behind it so you can tunnel the traffic you should be fine.
Now the config is much more difficult if you have to hop multiple asa/pix devices to get to where you need. Say from network B you go too network C and then to network A over a VPN.
You can post your scrubbed config and we can see what needs to be added.


Brent
Systems Engineer / Consultant
CCNP, CCSP