PIX Routing question

[freak12]

I'm new to pix and inherited a pix 515e with pdm version 3.0(1) and pix version 6.3(1). Only 2 interfaces are being used 1 for the outside and the 2nd for the internal network. The pix is setup as the default gateway for site A. The company has grown and is setting up a point to point with a new remote office Site B. Is it possible to set a static route on the pix since it is the default gateway for site A to route all traffic to site B across the point to point.

Site A and B Info:

Site A 172.16.3.x
Site A default gateway 172.16.3.254
Site A point to point 172.16.3.1
Site B 172.16.5.x
Site B default gateway 172.16.5.254
Site B point to point 172.16.5.1

Thanks

 

[Glitchen]

Try this
route inside 172.16.5.0 255.255.255.0 172.16.5.1 1
This will only route the 172.16.5.x network traffic

or change your default route to
route inside 0 0 172.16.5.1 1
of course I am assuming the router for the point to point is on the inside network.