PurpleRonnie
Technical User
Pix 506e U/R. Is it possible to redirect packets to a device on your inside network (inbound to the pix) based on source address? eg:
Source Destination Port Redirect to
195.184.x.x 212.14.x.x 21 192.168.1.x
The destination address is on the same subnet as the Pix's outside intface. I already know it can be done based on destination address by the command:
Static (insice,outside) tcp 212.14.x.x ftp 192.168.1.x ftp netmask 255.255.255.255 0 0
I am trying to get the pix to use the source address and port number if possible? >:-<
Source Destination Port Redirect to
195.184.x.x 212.14.x.x 21 192.168.1.x
The destination address is on the same subnet as the Pix's outside intface. I already know it can be done based on destination address by the command:
Static (insice,outside) tcp 212.14.x.x ftp 192.168.1.x ftp netmask 255.255.255.255 0 0
I am trying to get the pix to use the source address and port number if possible? >:-<