PIX PPTP VPN ACCESS

[drbk563]

I have PPTP VPN access configured on a PIX. Currently, users connect to the PIX VPN and access the internal network. However, when the users are connected to the VPN they are not able to use the internet. However, if I go to the VPN properties on the users computer and change the setting which states not to use the remote network default gateway then they are able to use the internet. So what I want to know is how can I enable split tunneling if I am using PPTP?

Thank you

 

[kbing]

I'm not sure that split-tunneling is an option on the PIX for the PPTP RAS-VPN.

Here's Cisco's PIX documentation on how to setup a PPTP RAS-VPN on v6.3 of PIX. Not sure what version you are using but I know this works because I've done this one.

I believe only IPSec RAS-VPN's can do split tunneling.

If you are at the client side and tracert

http://www.google.com

while connected; does it go thru the PPTP connection or local ISP?

 

[drbk563]

You did not post the Cisco documentation. Can you please post the link.

Thank you

 

[kbing]

Sorry...too bad the system doesn't do that for u...;-)

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/basclnt.html#wp1019591

 

[drbk563]

Thank you for the link and the help.