Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PIX gateway load-balancing

Status
Not open for further replies.
sunyasee

sunyasee

ISP
Apr 8, 2002
94
0
0
GB
Hello

I am trying to work out a solution to enable load balancing with a PIX that is connected to two routers that each have a 2mb connection to the same ISP. The idea is that the two routers are configured to load balance and give 4mb of bandwidth. Trouble is how do I configure the PIX to send traffic over both lines? I have tried HSRP but the router will receive traffic from the ISP on both routers but only send traffic out from the master. I have configured OSPF on the routers and PIX, but again I only see traffic sent down one line, has anyone configured a similar scenario?


Thanks


----

Sunyasee
 
Status
Not open for further replies.

Similar threads

markd885
  • Locked
  • Question
PAC file redirect web page to another gateway
Replies
0
Views
45
markd885
markd885
sampko
  • Locked
  • Question
Load Balancing Issues
Replies
1
Views
39
joepc
joepc
xwray
  • Locked
  • Question
PIX 501 DHCP Server function
Replies
0
Views
34
xwray
xwray
brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
42
brownmab53
brownmab53
MartinUMBT
  • Locked
  • Question
Failover / Load Balancing Interface that are not WAN
Replies
0
Views
33
MartinUMBT
MartinUMBT

Part and Inventory Search

Sponsor

Back
Top