PIX FIREWALL VPN RECONFIGURATION 1

[drbk563]

I am to reconfigure VPN access on a PIX firewall, so I am removing the old configuration lines from the PIX. However, there are a few which are listed below that the PIX does not allow me to remove. After I enter no in front of the lines they reappear when I do a sh running. How can I remove these lines?

isakmp policy 10 authentication rsa-sig
isakmp policy 10 encryption des
isakmp policy 10 hash sha
isakmp policy 10 group 1
isakmp policy 10 lifetime 86400
vpngroup vpn3000 idle-time 1800
vpngroup vmr2 idle-time 1800
vpngroup grace idle-time 1800
vpngroup <group_name> idle-time 1800


Thank You

 

[Supergrrover]

Have you taken out this line out first?
isakmp enable outside
Then kill the the rest, wri mem and reload.


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[drbk563]

Thank you for your help I removed the lines.