Hi,
Today my colleague add 2 lines of access-list to our PIX 525. After 10 minutes, my firewall was rebooted and until now can't start. The booting process as listed below.
The questions are :
1. What is my OS version? Flash?
2. How to remove those 2 lines (reset the config to default)?
3. How to solve the issue?
Thanks,
Andy
Booting process
================
Rebooting..þ
Wait.....
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
00 07 03 8086 7113 PCI Bridge
00 0D 00 8086 1209 Ethernet 11
00 0E 00 8086 1209 Ethernet 10
Cisco Secure PIX Firewall Embedded BIOS Version 4.3
Wait...ndeavor Board, Boot Block BIOS
+------------------------------------------------------------------------------+
| System BIOS Configuration, (C) 2000 General Software, Inc. |
+---------------------------------------+--------------------------------------+
| System CPU : Pentium III | Low Memory : 638KB |
| Coprocessor : Enabled | Extended Memory : 255MB |
| Embedded BIOS Date : 08/25/00 | Serial Ports 1-2 : 03F8 02F8 |
+---------------------------------------+--------------------------------------+
Cisco Secure PIX Firewall BIOS (4.0) #39: Tue Nov 28 18:44:51 PST 2000
Platform PIX-525
System Flash=E28F128J3 @ 0xfff00000
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1528320 bytes of image from flash.
################################################################################
#
256MB RAM
System Flash=E28F128J3 @ 0xfff00000
BIOS Flash=am29f400b @ 0xd8000
mcwa i82559 Ethernet at irq 11 MAC: 0006.5336.8129
mcwa i82559 Ethernet at irq 10 MAC: 0006.5336.8128
-----------------------------------------------------------------------
|| ||
|| ||
|||| ||||
..:||||||:..:||||||:..
c i s c o S y s t e m s
Private Internet eXchange
-----------------------------------------------------------------------
Cisco PIX Firewall
Cisco PIX Firewall Version 6.2(1)
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES: Disabled
Maximum Interfaces: 8
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
An internal error occurred. Specifically, a programming assertion was
violated. Copy the error message exactly as it appears, and get the
output of the show version command and the contents of the configuration
file. Then call your technical support representative.
assertion "addr < sfmm_chip_size" failed: file "sfmm.c", line 254
No thread name
Traceback:
0: 802decd5
1: 8007a8ce
2: 800769bb
3: 80078223
4: 8007635e
5: 800017d5
6: 800758ab
7: 80120ed6
vector 0x00000003 (breakpoint)
edi 0x8007a887
esi 0x000000fe
ebp 0x7ffffcb8
esp 0x7ffffcac
ebx 0x8007a5a3
edx 0x000003fd
ecx 0x0000000a
eax 0x00000042
error code n/a
eip 0x802dffac
cs 0x00000008
eflags 0x00000046
CR2 0x00000000
Stack dump: base:0x7ffffc2c size:64, active:64
0x7ffffd2c: 0x00020000
0x7ffffd28: 0x807f2828
0x7ffffd24: 0xfffe0000
0x7ffffd20: 0x00000300
0x7ffffd1c: 0x800769bb
0x7ffffd18: 0x7ffffd48
0x7ffffd14: 0x00000001
0x7ffffd10: 0x00000002
0x7ffffd0c: 0x800762f4
0x7ffffd08: 0x804a849c
0x7ffffd04: 0x00000020
0x7ffffd00: 0x805100c0
0x7ffffcfc: 0x7ffffd48
0x7ffffcf8: 0x8007a887
0x7ffffcf4: 0x000000fe
0x7ffffcf0: 0x8007a5a3
0x7ffffcec: 0x8007a8ce
0x7ffffce8: 0x7ffffd18
0x7ffffce4: 0x80317cd4
0x7ffffce0: 0xffffffff
0x7ffffcdc: 0x80078163
0x7ffffcd8: 0x807f2828
0x7ffffcd4: 0xfffe0000
0x7ffffcd0: 0x805100c0
0x7ffffccc: 0x000000fe
0x7ffffcc8: 0x8007a5a3
0x7ffffcc4: 0x8007a887
0x7ffffcc0: 0x802dec68
0x7ffffcbc: 0x802decd5
0x7ffffcb8: 0x7ffffce8
0x7ffffcb4: 0x00000046
0x7ffffcb0: 0x00000008
0x7ffffcac: 0x802dffac *
0x7ffffca8: 0x00000042
0x7ffffca4: 0x0000000a
0x7ffffca0: 0x000003fd
0x7ffffc9c: 0x8007a5a3
0x7ffffc98: 0x7ffffcac
0x7ffffc94: 0x7ffffcb8
0x7ffffc90: 0x000000fe
0x7ffffc8c: 0x8007a887
0x7ffffc88: 0x00000003
0x7ffffc84: 0x80004779
0x7ffffc80: 0x7ffffcb8
0x7ffffc7c: 0x802c4deb
0x7ffffc78: 0x7ffffc98
0x7ffffc74: 0x7ffffd48
0x7ffffc70: 0x00000001
0x7ffffc6c: 0x000000fe
0x7ffffc68: 0x8007a5a3
0x7ffffc64: 0x7ffffd48
0x7ffffc60: 0x80120ed6
0x7ffffc5c: 0x00000007
0x7ffffc58: 0x7ffffcac
0x7ffffc54: 0x80002d70
0x7ffffc50: 0x7ffffc80
0x7ffffc4c: 0x7ffffcac
0x7ffffc48: 0x80002ab0
0x7ffffc44: 0x00000040
0x7ffffc40: 0x7ffffc80
0x7ffffc3c: 0x74656720
0x7ffffc38: 0x7ffffe28
0x7ffffc34: 0x2c737261
0x7ffffc30: 0x8007a887
-----------------------------------------------
Nested traceback attempted via interrupt.
Traceback output aborted.
-----------------------------------------------
Rebooting..þ
Today my colleague add 2 lines of access-list to our PIX 525. After 10 minutes, my firewall was rebooted and until now can't start. The booting process as listed below.
The questions are :
1. What is my OS version? Flash?
2. How to remove those 2 lines (reset the config to default)?
3. How to solve the issue?
Thanks,
Andy
Booting process
================
Rebooting..þ
Wait.....
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
00 07 03 8086 7113 PCI Bridge
00 0D 00 8086 1209 Ethernet 11
00 0E 00 8086 1209 Ethernet 10
Cisco Secure PIX Firewall Embedded BIOS Version 4.3
Wait...ndeavor Board, Boot Block BIOS
+------------------------------------------------------------------------------+
| System BIOS Configuration, (C) 2000 General Software, Inc. |
+---------------------------------------+--------------------------------------+
| System CPU : Pentium III | Low Memory : 638KB |
| Coprocessor : Enabled | Extended Memory : 255MB |
| Embedded BIOS Date : 08/25/00 | Serial Ports 1-2 : 03F8 02F8 |
+---------------------------------------+--------------------------------------+
Cisco Secure PIX Firewall BIOS (4.0) #39: Tue Nov 28 18:44:51 PST 2000
Platform PIX-525
System Flash=E28F128J3 @ 0xfff00000
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1528320 bytes of image from flash.
################################################################################
#
256MB RAM
System Flash=E28F128J3 @ 0xfff00000
BIOS Flash=am29f400b @ 0xd8000
mcwa i82559 Ethernet at irq 11 MAC: 0006.5336.8129
mcwa i82559 Ethernet at irq 10 MAC: 0006.5336.8128
-----------------------------------------------------------------------
|| ||
|| ||
|||| ||||
..:||||||:..:||||||:..
c i s c o S y s t e m s
Private Internet eXchange
-----------------------------------------------------------------------
Cisco PIX Firewall
Cisco PIX Firewall Version 6.2(1)
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES: Disabled
Maximum Interfaces: 8
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
An internal error occurred. Specifically, a programming assertion was
violated. Copy the error message exactly as it appears, and get the
output of the show version command and the contents of the configuration
file. Then call your technical support representative.
assertion "addr < sfmm_chip_size" failed: file "sfmm.c", line 254
No thread name
Traceback:
0: 802decd5
1: 8007a8ce
2: 800769bb
3: 80078223
4: 8007635e
5: 800017d5
6: 800758ab
7: 80120ed6
vector 0x00000003 (breakpoint)
edi 0x8007a887
esi 0x000000fe
ebp 0x7ffffcb8
esp 0x7ffffcac
ebx 0x8007a5a3
edx 0x000003fd
ecx 0x0000000a
eax 0x00000042
error code n/a
eip 0x802dffac
cs 0x00000008
eflags 0x00000046
CR2 0x00000000
Stack dump: base:0x7ffffc2c size:64, active:64
0x7ffffd2c: 0x00020000
0x7ffffd28: 0x807f2828
0x7ffffd24: 0xfffe0000
0x7ffffd20: 0x00000300
0x7ffffd1c: 0x800769bb
0x7ffffd18: 0x7ffffd48
0x7ffffd14: 0x00000001
0x7ffffd10: 0x00000002
0x7ffffd0c: 0x800762f4
0x7ffffd08: 0x804a849c
0x7ffffd04: 0x00000020
0x7ffffd00: 0x805100c0
0x7ffffcfc: 0x7ffffd48
0x7ffffcf8: 0x8007a887
0x7ffffcf4: 0x000000fe
0x7ffffcf0: 0x8007a5a3
0x7ffffcec: 0x8007a8ce
0x7ffffce8: 0x7ffffd18
0x7ffffce4: 0x80317cd4
0x7ffffce0: 0xffffffff
0x7ffffcdc: 0x80078163
0x7ffffcd8: 0x807f2828
0x7ffffcd4: 0xfffe0000
0x7ffffcd0: 0x805100c0
0x7ffffccc: 0x000000fe
0x7ffffcc8: 0x8007a5a3
0x7ffffcc4: 0x8007a887
0x7ffffcc0: 0x802dec68
0x7ffffcbc: 0x802decd5
0x7ffffcb8: 0x7ffffce8
0x7ffffcb4: 0x00000046
0x7ffffcb0: 0x00000008
0x7ffffcac: 0x802dffac *
0x7ffffca8: 0x00000042
0x7ffffca4: 0x0000000a
0x7ffffca0: 0x000003fd
0x7ffffc9c: 0x8007a5a3
0x7ffffc98: 0x7ffffcac
0x7ffffc94: 0x7ffffcb8
0x7ffffc90: 0x000000fe
0x7ffffc8c: 0x8007a887
0x7ffffc88: 0x00000003
0x7ffffc84: 0x80004779
0x7ffffc80: 0x7ffffcb8
0x7ffffc7c: 0x802c4deb
0x7ffffc78: 0x7ffffc98
0x7ffffc74: 0x7ffffd48
0x7ffffc70: 0x00000001
0x7ffffc6c: 0x000000fe
0x7ffffc68: 0x8007a5a3
0x7ffffc64: 0x7ffffd48
0x7ffffc60: 0x80120ed6
0x7ffffc5c: 0x00000007
0x7ffffc58: 0x7ffffcac
0x7ffffc54: 0x80002d70
0x7ffffc50: 0x7ffffc80
0x7ffffc4c: 0x7ffffcac
0x7ffffc48: 0x80002ab0
0x7ffffc44: 0x00000040
0x7ffffc40: 0x7ffffc80
0x7ffffc3c: 0x74656720
0x7ffffc38: 0x7ffffe28
0x7ffffc34: 0x2c737261
0x7ffffc30: 0x8007a887
-----------------------------------------------
Nested traceback attempted via interrupt.
Traceback output aborted.
-----------------------------------------------
Rebooting..þ
