PIX Firewall 515e outbound traffic failing

[peanutno1]

Hi
I cannot seem to get windows active directory traffic to pass through our pix firewall.
I am using the default lists that is on the pix as I am not sure what I should be configuring regards access lists to all dns resolving, internet browsing and smtp email.
I can ping the outside world from the pix, so I know the route is working through the leased line from the pix to the outside world.
I can telnet onto the pix internally and I can ping it from the windows servers. I am using the inside lan address of the pix as the default gateway for the active directory domain servers and workstations. The domain is fine internally and dns is ok internally, it seems to be the traffic trying to get from the domain throught ot he outside world that is the problem. Mail is flowing in through the pix its just going out and internet browsing.

Please advise what my access list should be

thanks

 

[computerhighguy]

Any posability you could post your config? Can you be more specific as to what you mean by "get[ing] windows active directory traffic to pass through our pix firewall". As much detail as possible please.

 

[peanutno1]

guys, thanks for all your help, problem now solved, found the problem to be a "global (outside) statement" was causing a conflict.
removed this statement and all ok