Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pix Config

Status
Not open for further replies.

EgWeb

MIS
Oct 14, 2002
52
US
Hi,

Having a little trouble with the pix config. The routes are intermitten. I have outside(192.168.1.5), inside(10.0.0.1) and VPN(172.16.0.0). Not sure what's wrong in this config.

I can connect via VPN, but have a tough time pinging around. The internet access comes on for a little bit, then goes off for a brief period (2min maybe) and then it will start working again. I thought about duplexes but haven't made any changes.

Any help is appreciated!

config
************************************
: Saved
: Written by enable_15 at 11:17:42.234 UTC Wed Sep 24 2003
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password *pass* encrypted
passwd *pass* encrypted
hostname name
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list 101 permit ip 10.0.0.0 255.0.0.0 172.16.0.0 255.255.0.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.5 255.255.255.0
ip address inside 10.0.0.1 255.0.0.0
ip audit info action alarm
ip audit attack action alarm
ip local pool pptp-pool 172.16.1.2-172.16.1.20
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 192.168.1.50
nat (inside) 0 access-list 101
nat (inside) 1 10.0.0.0 255.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 192.168.1.1 255
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-pptp
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication chap
vpdn group 1 ppp authentication mschap
vpdn group 1 ppp encryption mppe auto
vpdn group 1 client configuration address local pptp-pool
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn username *user* password **********
vpdn enable outside
terminal width 80
Cryptochecksum:b55edf28f319ddce161f7c0769ea7b31
 
Found a possible typo that could cause it...

route outside 0.0.0.0 0.0.0.0 192.168.1.1 255
should be
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

what's the impact of that error?

Thanks,
Andy
 
And the ping thing...

conduit permit icmp any any

?

Thanks,
Andy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top