Hi all,
Newbie here - got myself a 501 and I imagine it's right to go in it's factory settings, except I need my Exchange server visible. Can anyone help?
Setup is: Got an ADSL modem/router with NAT, and Port Forwarding turned on for port 25 for my exchange server (192.168.15.3). The ADSL router's internal IP is 10.0.0.1
My PIX is connected to the ADSL router, and it's outside IP is 10.0.0.2 (internal is 192.168.15.251).
So when I've been reading the forum and people quote the
static (inside, outside) <exchange-public-ip> <exchange-private-ip> netmask 255.255.255.255
command, I'm confused. Obviously the <exchange-public-up> is not my ADSL public IP, coz as packets come in, they're being changed to have a destination of 192.168.15.3 aren't they? So what do I need to do to allow outside packets on port 25 to pass through?
Newbie here - got myself a 501 and I imagine it's right to go in it's factory settings, except I need my Exchange server visible. Can anyone help?
Setup is: Got an ADSL modem/router with NAT, and Port Forwarding turned on for port 25 for my exchange server (192.168.15.3). The ADSL router's internal IP is 10.0.0.1
My PIX is connected to the ADSL router, and it's outside IP is 10.0.0.2 (internal is 192.168.15.251).
So when I've been reading the forum and people quote the
static (inside, outside) <exchange-public-ip> <exchange-private-ip> netmask 255.255.255.255
command, I'm confused. Obviously the <exchange-public-up> is not my ADSL public IP, coz as packets come in, they're being changed to have a destination of 192.168.15.3 aren't they? So what do I need to do to allow outside packets on port 25 to pass through?