Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pix 525 Packet Debug

Status
Not open for further replies.
southside

southside

Technical User
Feb 9, 2004
46
GB
Hi All,

I am using Software Version 7.0(4) on a Pix 525. On previous software versions I was able to run Packet debug on the Eth0 and Eth1 when troubleshooting. This feature seems to have been removed and now the closest I can get is the Capture command. This sends the debug to a log.

Is there a better way of debugging the activity of the Eth ports realtime or how should I specifically monitor these ports during troubleshooting or short monitor periods.


Thanks

Adrian Jones
 
Status
Not open for further replies.

Similar threads

brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
71
brownmab53
brownmab53
tjbradford
  • Locked
  • Question
ASAX 5508 - basic config - packet loss
Replies
0
Views
83
tjbradford
tjbradford
xwray
  • Locked
  • Question
PIX 501 DHCP Server function
Replies
0
Views
61
xwray
xwray
quazimotto
  • Locked
  • Question
Correct Upgrade Path for PIX
Replies
7
Views
137
quazimotto
quazimotto
quazimotto
  • Locked
  • Question
Ping thru PIX to subnet inside??!!
Replies
0
Views
58
quazimotto
quazimotto

Part and Inventory Search

Sponsor

Back
Top