This is very weird, CISCO could not figure it out yet.
I am using PIX 6.2(2) and PDM 2.1(1).
1-VPN from outside to inside works fine
2-Traffic between DMZ and outside works fine
PROBLEM: Can't get out to the internet from inside interface.
For what I've read, this is all that is required to allow users in the inside network to access the outside network:
//// using PAT)
global (outside) 1 63.137.81.154
nat (inside) 1 0 0
route outside 0.0.0.0 0.0.0.0 63.137.81.153 1
ip address outside 63.137.81.156
ip address inside 192.168.1.3
log entry:
106011: Deny inbound (No xlate) udp src outside:192.168.1.201/2178 dst outside:10.10.10.8/53
I appreciate your help.
P.S. PDM 2.1(1) has a great wizard for VPN, but does not parse the GLOBAL command.
I am using PIX 6.2(2) and PDM 2.1(1).
1-VPN from outside to inside works fine
2-Traffic between DMZ and outside works fine
PROBLEM: Can't get out to the internet from inside interface.
For what I've read, this is all that is required to allow users in the inside network to access the outside network:
//// using PAT)
global (outside) 1 63.137.81.154
nat (inside) 1 0 0
route outside 0.0.0.0 0.0.0.0 63.137.81.153 1
ip address outside 63.137.81.156
ip address inside 192.168.1.3
log entry:
106011: Deny inbound (No xlate) udp src outside:192.168.1.201/2178 dst outside:10.10.10.8/53
I appreciate your help.
P.S. PDM 2.1(1) has a great wizard for VPN, but does not parse the GLOBAL command.